NO. 14 ,Fengze Road, Zhangjiawo Industrial Park,Xiqing District,Tianjin,China.
Home News

Pulse test bench internal mechanical cleaning

All Products
Good quality Top Products 2 for sales
Good quality Top Products 2 for sales
I'm Online Chat Now
Company News

Pulse test bench internal mechanical cleaning

Pulse test bench internal mechanical cleaning

 

 

 

The pulse test bench arrives at the customer's place of use. It starts from the normal use of the customer after installation and commissioning. Normally, the pulse test bench is used well. The pulse test bench is used for a long period of time. At this time, the pulse pressure test bench of the hydraulic station is cleaned. Need special attention:
When the pulse test bench is cleaned, hydraulic oil for working use is often used.
1, can not use kerosene, gasoline, alcohol, steam or other liquids to prevent corrosion of hydraulic components, piping, fuel tanks and seals;
2. During the cleaning process, the operation of the hydraulic pump and the heating of the cleaning medium are performed at the same time. When the temperature of the cleaning oil is (50-80)°C, the rubber slag in the system is easily removed;
3. During the cleaning process, the non-metallic hammer rod can be used to strike the tubing, and can be tapped continuously or intermittently in order to facilitate the removal of attachments in the pipeline;
4, intermittent operation of the hydraulic pump is conducive to improving the cleaning effect, the intermittent time is generally (10-30) min;
5. In the circuit of the cleaning oil circuit, filter or filter should be installed. At the beginning of cleaning, due to more impurities, an 80 mesh filter can be used, and after the cleaning, a filter with more than 150 meshes can be used.
6, cleaning time is generally (48-60) hours, according to the system's complexity, filtration accuracy requirements and pollution levels and other factors;
7, in order to prevent external moisture caused by corrosion, the end of cleaning, the hydraulic pump should continue to run until the temperature returned to normal;
8. After the pulse test bench is cleaned, the cleaning oil in the circuit should be eliminated.
The inside of the pulse test bench is like a heart of the human body, ensuring the normal operation of the equipment.

 

 

 

 

Pub Time : 2018-05-07 10:27:42 >> News list
Contact Details
Tianjin Getes Testing Equipment Technology Development Co., Ltd.

Contact Person: Mr. Cai

Tel: 86-22-87980566

Fax: 86-22-87980568-612

Send your inquiry directly to us (0 / 3000)